Racelogic VB2SX Guida Utente Pagina 15

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 28
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 14
VB2SX User Guide
Page 15 of 28
CAN / RS232 Ports / USB
The VB2SX is equipped with a CAN Bus interface, a RS232 serial port and an USB port. The RS232 port or USB is used for all communication between the
VBOX and laptop PC. The USB or RS232 ports are able to transmit live data from the VBOX to the PC for viewing and performing real-time tests.
Note only the USB port is used for firmware upgrading
The CAN Bus port is available in either the socket labelled CAN or the socket labelled Serial. This CAN port has three functions, CAN Input in VCI mode, CAN
Input in Racelogic Modules Mode (Internal Mode) and CAN output in Racelogic Modules Mode (External Mode).
VCI Mode:
This mode should be selected if you wish to log incoming CAN data from external modules from other manufacturers. Note in VCI mode no CAN output or
connection to Racelogic modules is possible.
Racelogic Modules mode
This mode should be selected when Racelogic modules are connected to the VBOX or VBOX CAN output is required. Depending upon configuration, VBOX
Tools software should be set as follows:
Internal Mode: This mode should be selected when Racelogic input modules are connected to the VBOX. In this mode the CAN id’s and Baud rate are
non configurable.
External Mode: This CAN mode should be used when a VBOX CAN data output is to be used by an external CAN device such as a Data acquisition
system. In this mode the attributes of the CAN output stream are configurable by the user in VBOXTools
See the section ‘Setup’ in the VBOX software manual. Note that Internal Mode and External mode are not configurable from the front panel of the VB2SX
The Socket labelled CAN also contains a secondary RS232 port for direct connections to the GPS engine for Local DGPS correction connection.
Vedere la pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Commenti su questo manuale

Nessun commento